[DISCONTINUED] SEAT HEATER PRODUCTS

My seat heater is not getting warm.

Check the voltage being sent to the seat heater. This can be done with a multimeter at the pin and the barrel connector from the switch. For the multimeter, the pin is positive and the barrel connector is negative. With the seat heater on high, there should be 12VDC. With the seat heater on low, there should be 6VDC.

My seat heater is too hot.

The seat heater is 30W and designed to be used in all weather conditions. If the seat heater is too hot for your application, trim the length of the heater one inch at a time. This will drop the wattage of the heater overall. Please note that you can only trim the edge opposite the wire exit. Do not cut between the two bus bars, as that will cause the heater to stop functioning.

Product Instructions

Back to Resource Library